Products
Luna 880-Matic
Luna 880
Continuous technological research, Montresor’s well-known precision and reliability have led to the creation of the new Luna 880-Matic: a development of the LUNA 880 model, combined with sophisticated automation.
Matic
The Luna 880-Matic is a totally automatic machine. From the touch screen, the operator has only to choose the profile from the menu, set the workpiece thickness and choose the profile radius or possible chamfers.
Completely automatic machine
Once the starting position is input, the pressure roller unit, the calibrating device, the diamond bevels, the shaping wheels and the template place are all automatically adjusted to the correct values to create the profile.
Precutting wheels
Two precutting wheels allow to execute preliminary cuts for bullnose edges with diamond tools. This inverter commanded unit also allows the use of abrasives to polish the bevels of flat edges.
Shaping
A simple and innovative movement system allows the shaping of many profiles without the use of any particular and expensive moving parts. 2 frontal units execute the shaping of bullnose edges from 15-80mm or the polishing of straight edges until 80mm.
Polishing
Six moving frontal units execute the polishing flat, slanted, bullnose edges and all combined profiles available in the machine's work programmes.
Pressure rollers
The conveyor belt is guided and runs over a wear-resistant stainless steel surface, close to the pressure units. In this way maximum stability of the slab during the job is obtained. The pressure roller unit automatically moves to the required thickness.
Bevelling units
2+2 bevelling units allow the polishing of small bevels of straight edges.
| Technical details ......... Video ......... Download brochure |
